Local contractor in 73701

A unit air flow issue was identified in a 3-ton upflow furnace located in the laundry area. We accessed the unit and performed the necessary repair work to ensure proper airflow and efficiency. The service was successfully completed, restoring the heating system’s performance for the homeowner in Enid.

A service call was conducted to address HVAC repair needs in Enid. Our team worked on diagnosing the issue and implementing the necessary repairs. The task was assigned to Brandon and Joshua, ensuring prompt and effective resolution. We focused on providing quality HVAC solutions, ensuring the system operates efficiently for the customer's comfort.

To address a service call in Enid, we sent Joshua to assess and resolve the situation. Upon arrival, he began investigating the issue thoroughly to determine the necessary repairs or adjustments. Our focus was on providing effective solutions to ensure the customer's needs were met efficiently.

A malfunctioning HVAC unit prompted our visit to address the issue. We found that the unit was low on freon, which was affecting its efficiency. After adding freon, we conducted a leak detection and identified a potential leak in the evaporator coil. We are in the process of completing the repairs.

A weak airflow and inadequate cooling from the HVAC unit indicated a need for service. We inspected the system and found that it may require a custom plenum to enhance performance. Our technician, Brandon, serviced the unit to improve its functionality. After our work was completed, the system was better equipped to provide effective cooling for the home in Enid.

A condenser fan was not functioning properly, and the customer had already changed the run capacitor and contactor. We conducted a thorough inspection to identify the root cause and address the issue. The repair was successfully completed, restoring optimal operation to the HVAC system for the Church of God Chapel in Enid.

A scheduled preventative maintenance visit was conducted for an HVAC system. We thoroughly inspected and serviced the equipment to ensure optimal performance and efficiency. This proactive approach helps in extending the lifespan of the system and reducing future repair needs. The work was completed successfully in Enid.

A malfunctioning HVAC unit presented issues as it would not shut off. We identified a plugged drain line, which we vacuumed to clear the blockage. To ensure proper function, we pulled the evaporator cover and added treatment pills to the drain pan. After verifying the drain line was flowing, we installed a new circuit board and successfully tested the system in both heat and cool modes, ensuring it operated without problems.

A unit not cooling properly raised concerns, leading us to examine the HVAC system. Upon inspection, we identified that the compressor was faulty. We promptly addressed the issue, restoring comfort to the home.

Weak air flow in the HVAC system prompted us to conduct a thorough service call. We assessed the situation, identified potential issues, and took the necessary steps to restore proper functionality. With our efforts, we ensured improved air circulation for the homeowner in Enid, contributing to their overall comfort.

A customer's HVAC system was not cooling as expected, as it had not been checked since its installation six years ago. We serviced the unit by checking electrical components, air filters, and freon levels. Additionally, we washed the condenser coil and cleaned the clogged evaporator coil, which had accumulated dog hair. The system is now functioning well, achieving a 21-degree temperature difference.

An AC unit requiring preventative maintenance was serviced to ensure optimal operation for the summer. We assessed the electrical components, checked filters and freon levels, and washed the condenser. We found the system low on freon, added the necessary amount, and confirmed it was performing efficiently, achieving a 20-degree temperature difference. Drain lines were also vacuumed, preparing the unit for continued use.

A malfunctioning HVAC system needed attention due to issues with ignition, which we promptly addressed. Upon inspection, we discovered a dirty evaporator coil and blower wheel, along with the absence of an air filter. We cleaned the coil and blower wheel, restoring functionality to the furnace and ensuring efficient operation moving forward.

A malfunctioning heat strip and contactor in the HVAC system needed attention. We assessed the situation and identified the necessary components that required replacement. Our technician, Jordan Vidaurri, efficiently tackled the repairs to ensure the system runs smoothly. We are committed to restoring comfort and reliability to your heating system in Enid.

A malfunctioning geo unit prompted us to investigate communication issues. Upon inspection, we discovered a faulty circuit board. We replaced the defective board and successfully ran the geo unit without any problems. The service call was completed in Enid, ensuring efficient operation for the homeowner.

A front tube heater was not functioning, prompting our inspection of the unit. We discovered a malfunctioning inducer motor and proceeded to install a new one. After the installation, the heater operated without any issues. For added reliability, we recommended ordering a new inducer assembly as a backup part.

A unit was experiencing issues, clicking but not powering on. We performed a thorough inspection and diagnosis of the system to identify the root cause of the problem. After completing the necessary repairs, the unit was restored to full functionality.

A flashing red indicator on the thermostat signaled the need for a service call. We responded to this request and evaluated the system. It appeared that the unit may require a recharge. We checked the full functionality of the HVAC system to ensure it operates efficiently.

A low-performing HVAC system prompted our field service team to investigate further. Upon inspection, we discovered that the unit was low on refrigerant. We conducted a leak check and identified a leak in the evaporator coil. After adding 2 pounds of R410a, the system began operating efficiently again. We will need to order a new evaporator coil to ensure long-term performance.

A malfunctioning HVAC system was addressed by our team. We discovered that the unit was locked out due to a loss of charge switch. After conducting a leak check, we identified a leak in the evaporator coil and recommended its replacement. Additionally, we connected the electric heat strips, ensuring they functioned properly. The evaporator coil was then replaced, pressure tested, and charged with the factory amount, resulting in the system operating smoothly in both heating and cooling modes.

A service call was made to address the needs of the HVAC system in Cleo Springs. We promptly attended to the situation, applying our expertise to ensure everything was functioning correctly. The work was completed efficiently, providing reassurance that the system is in good condition. Brandon was the assigned technician, delivering quality service to ensure customer satisfaction.

A heating issue in one of the commercial units prompted a thorough inspection, revealing a hole in the heat exchanger. We recommended replacing the entire heating unit to ensure efficient heating. Access was coordinated with Duane to determine the optimal entry point for the roof replacement work.

A malfunctioning HVAC unit was reported, necessitating our service. We identified that the system was in a lockout mode due to a faulty supply air temperature sensor. By bypassing the sensor and adjusting the low fan speed, we successfully restored functionality to the unit. It is recommended to order a replacement sensor for future reliability.

A malfunctioning wall furnace in the bedroom was our primary focus. We found that the pilot light was not lit, which was preventing the unit from operating. After igniting the pilot, we confirmed the wall heater is now fully functional. Additionally, we noted the other two wall furnaces have never worked, and we will continue to monitor that situation.

A thorough home inspection was conducted in Enid to assess the property's condition. We examined various components, ensuring safety and functionality throughout. This included checking structural integrity, plumbing, electrical systems, and any potential issues that may affect the homeowner. The inspection results were documented to provide insights for future maintenance.

A comprehensive home inspection was conducted to evaluate the property. We assessed various elements, ensuring everything was functioning properly and met safety standards. This thorough examination provided insights into the home's condition, helping the owner make informed decisions. Images documenting our findings were captured for reference.

To enhance the HVAC system at Windie Nails, we added three supply duct runs and installed essential components, including lay-in grills and duct collars. We conducted a thorough leak test, which confirmed the system held pressure effectively. The existing filter drier indicated a clog, prompting us to replace it after recovering the refrigerant, ensuring optimal performance post-installation.

A unit experiencing poor airflow prompted us to conduct preventative maintenance. We inspected the system and assessed the blower motor, addressing potential issues to ensure optimal performance. Our focus was on enhancing the system's efficiency and reliability, providing Vicky in Enid with a thorough maintenance service that helps prolong the life of her HVAC unit.

The homeowner recently acquired new equipment and sought a residential estimate for the installation. We thoroughly assessed the setup requirements and provided a detailed estimate to ensure the installation process aligns with their needs. Our aim was to facilitate a smooth transition to the new system, preparing for the upcoming installation with clear expectations and requirements.

A residential estimate was conducted at a property in Enid. We assessed the necessary work and details required for the upcoming project. This evaluation helps in providing the homeowner with a clear and comprehensive understanding of the services needed to proceed effectively. We gathered relevant information to ensure accuracy in our proposal.