Local contractor in 73703

An HVAC maintenance call was performed to ensure the system was functioning efficiently. We completed a thorough inspection of the unit and addressed any necessary adjustments. This proactive approach helps maintain optimal performance and prolongs the lifespan of the HVAC equipment.

A service call was scheduled to address specific HVAC repair needs in Enid. Our technician, Brandon, assessed the system to identify issues and implemented the necessary repairs to restore optimal functionality. We ensured everything was working efficiently before completing the job.

A service call was completed for the homeowner in Enid, where we serviced the air conditioning unit in preparation for the summer. During our inspection, we checked the electrical components, air filter, freon levels, and thoroughly washed the condenser coil. We identified that both the run and start capacitors were faulty, which we replaced with new parts. The system is now functioning effectively, achieving a 17-degree temperature difference.

A thorough inspection of the HVAC system revealed optimal performance with the capacitor operating within the specified range. We examined the condenser fan motor and compressor, ensuring they were functioning smoothly and efficiently. The condenser coil was cleaned to enhance airflow, contributing to the system's reliability. Our work ensured that the homeowner's heating and cooling requirements would be met effectively.

A unit that was not cooling effectively prompted us to investigate the HVAC system. Upon inspection, we discovered a faulty water pump. We removed the bad pump and promptly replaced it, restoring the system to optimal functionality. Our timely intervention ensured that the cooling issues were fully resolved, providing comfort to the homeowner in Enid.

A malfunctioning HVAC unit was found to be out of refrigerant. We identified a leak at the suction core and performed necessary repairs. The evaporator coil was cleaned, and the condenser was serviced to prepare for the summer months. After adding 5 lbs of R427a refrigerant, the system is now functioning effectively.

A thorough HVAC maintenance visit was performed to ensure optimal system performance. We discovered the system was nearly out of freon and promptly located and repaired a leak on the suction line near the compressor inlet. Electrical components were checked, the air filter was changed, and the condenser was cleaned. After weighing in 5 lbs of R410a, the unit operated smoothly with a 25-degree temperature difference.

A malfunctioning bar cooler prompted our visit to ensure proper operation. We discovered that the relay on the compressor was burnt out. After confirming that the compressor was not grounded, we determined it had been overheated and was off on overload. A replacement relay is necessary for restoration.

A service call was conducted to address an air conditioning unit that was not maintaining a consistent temperature and was suspected of needing a refrigerant charge. We serviced the AC for the summer by checking electrical components, inspecting air filters, and washing the condenser coil. During our evaluation, we found a leaking evaporator coil, which will require a quote for replacement. The AC unit is currently operational with 3 lbs of R410a refrigerant.

A malfunctioning HVAC system led us to identify that the west unit was out of freon and needed replacement. We serviced the other two condensers to ensure they were ready for summer, replacing a 45/5uf capacitor and adding 2.5 lbs of R410a and 2 lbs of R427a. The upstairs and downstairs units are now functioning effectively.

A malfunctioning air conditioning unit prompted our visit to address the issue. We conducted a thorough assessment and determined that the unit may require additional refrigerant. In addition, we provided an estimate for ductless units suitable for the upstairs bedrooms, evaluating optimal placements for their installation. All tasks were completed efficiently in Enid.

A condenser fan issue was identified in the PTAC unit, which was not functioning properly. We located the compressor, which was locked up and required further assessment for a replacement. We are in the process of preparing an equipment quote to address the necessary repairs.

A malfunctioning HVAC unit prompted us to address cooling issues for the homeowner in Enid. Upon inspection, we identified the root cause and performed necessary repairs to restore optimal functioning. We ensured the system was fully operational, providing the homeowner with efficient cooling once again.

The HVAC system was not functioning, as both units shut off shortly after being turned on. We investigated and found the system empty. Our team checked the outdoor unit for leaks using soap bubbles on all joints and a sniffer but found no issues. Inside, we detected leaks around the heads and took apart one unit for a thorough inspection, confirming and addressing the leak before reassembling everything.

A garage addition was identified, measuring 21 by 16 feet with a peak height of 14 feet. We evaluated the requirements for installing a multi-zone ductless mini-split system to serve both the new addition and the kitchen, which is 15 by 12 feet. We will provide a detailed estimate for this HVAC solution to ensure comfort in both spaces.

A malfunctioning HVAC system was reported, specifically a 3-ton downflow unit that was failing to cool effectively. We conducted a thorough inspection and implemented the necessary repairs to restore optimal functionality. Following our work, the unit was able to maintain the desired temperature, ensuring a comfortable environment for the homeowner in Enid.

A malfunctioning walk-in cooler prompted us to address issues with its evaporator fan motors. We installed new motors and defrosted the coil, but the fans remained inoperative. We noted that a fan harness is needed, and the necessary parts have been ordered for prompt arrival.

A leaking evaporator coil was detected during our visit, prompting a thorough inspection of the HVAC system. We identified the source of the issue and noted the need for a replacement of the evaporator coil. A detailed quote will be provided to address this necessary repair, ensuring optimal performance of the system moving forward.

A condenser fan was not turning off, leading to insufficient cooling for the homeowner's HVAC unit. We discovered a burnt wire on the compressor and installed a terminal repair kit to fix the issue. Additionally, we serviced the air conditioning system to prepare it for the summer. This ensured proper functionality and comfort for the customer.

Our service call in Enid involved a comprehensive maintenance of the HVAC systems at the main house and a rental property. We washed the condensers, checked the electrical components, and added refrigerant where necessary. Additionally, we recommended changing the air filters to enhance performance. The task required the installation of a new capacitor and included the servicing of multiple units to ensure optimal operation.

A residential estimate was conducted to assess the necessary repairs for an HVAC system. We evaluated the existing equipment and outlined the scope of work needed for enhancements. Our field technicians, Blazer and Miguel, provided detailed insights and recommendations to ensure optimal performance. This estimate will guide the homeowner in making informed decisions about their HVAC needs in Enid.

A malfunctioning outdoor condenser unit prompted us to investigate the HVAC system in Enid. We discovered a defective condenser fan motor and replaced it. Additionally, we identified that the unit was low on refrigerant, so we added R410A after checking for leaks, ensuring optimal performance. We will monitor the system's charge on a warmer day in the future.

A malfunctioning heater needed attention. We found a bad inducer motor during our diagnostic and managed to oil it, restoring its function temporarily. We documented the need for a new inducer assembly and scheduled a return visit for installation. This repair will ensure the heating system operates effectively for the homeowner in Enid.

A malfunctioning HVAC unit led us to investigate the issue in Enid. We discovered a faulty compressor that was preventing the system from shutting off. After addressing the compressor, we also checked the heat strips and confirmed they were operating properly. This ensured the system would function effectively moving forward.

After detecting issues with the fan motor not operating, we went to Enid to investigate the problem. Upon inspection, we found that the disconnect had burned out and advised the homeowner to contact a qualified electrician for resolution. We completed the visit and ensured that all necessary steps were taken for safety.

Upon inspecting the mini-split system, we discovered issues that required attention. A new fan motor was installed on the lobby unit, and the condensers were thoroughly cleaned. We identified a bad flare on the suction line, which was fixed, and after adding refrigerant, the system began to operate effectively. Additionally, we replaced a pinched wire harness related to the condenser fan motor to ensure optimal performance.

A malfunctioning HVAC system prompted our service call to the home in Enid. We found a faulty condenser fan motor on the downstairs unit and repaired the plenum. In addition, we serviced both units for the upcoming summer, checking electrical components, filters, and refrigerant levels, ensuring they are both operating efficiently and achieving a 23-degree temperature difference.

A malfunctioning air conditioning system needed attention during our service visit. We discovered that the east unit had a bad fan capacitor, which we replaced, restoring its functionality. We also washed both condensers, checked filters, assessed electrical components, and evaluated freon levels. The west unit had a weak fan capacitor as well, which we replaced. Both systems are now operating efficiently.

An ice machine was found operating but not producing quality ice. We discovered an obstruction in the water pump check valve that was hindering functionality. After cleaning the check valve assembly, we restored the ice machine to working order. The unit is now functioning well, providing the necessary ice as intended.

A routine service call led us to inspect the HVAC system in Enid. We found the unit low on refrigerant and identified condensate overflow codes in memory. We added refrigerant and cleared the condensate drain lines, ensuring the system operates efficiently with a 30-degree temperature difference now.