Local contractor in 73768

To address the homeowner's request in Ringwood, we conducted a residential estimate focused on an HVAC installation. During the assessment, we noted the desire to replace a drain as part of the project. We ensured all aspects of the job were considered to provide a comprehensive solution tailored to the homeowner's needs.

A malfunctioning HVAC system was diagnosed with the condenser fan not turning. We identified a tripped breaker and a faulty start capacitor. After resetting the breaker, the unit was operational again. We will return to install a new start capacitor to ensure the system runs efficiently. The job was completed in Ringwood, and we're committed to providing reliable HVAC repair services.

A malfunctioning air conditioning unit prompted our visit. We found a bad run capacitor and a dirty condenser, along with low refrigerant charge and a slow fan motor. We installed a new capacitor and fan motor, and charged the unit with R410A. After servicing the system for summer readiness, the air conditioning is now operating effectively.

A malfunctioning condenser fan prompted our team to investigate the HVAC system. We identified a faulty condenser fan motor and proceeded to install a new 1075 RPM, 230V motor along with a 7.5µF capacitor. After completing the installation, we tested the unit to ensure it was running smoothly without any issues.

A unit was leaking into the vents, which indicated a potential clog in the drainage system. We discovered a plugged condensate drain during our inspection. To resolve the issue, we cleared the line by blowing it out and ensured it was fully operational by pouring water down the drain. The job was completed successfully, restoring the system’s functionality.

A malfunctioning HVAC system prompted our visit to Ringwood. We replaced a blown fuse and a leaking run capacitor, which had been causing issues. Additionally, we installed a new contactor and serviced the air conditioning unit to prepare it for summer. After our work, the system was functioning well, demonstrating a significant temperature difference.

A thorough inspection of the HVAC systems at Yolo Ranch allowed us to ensure optimal performance for the summer season. We serviced all units, checking electrical components, cleaning condensers, and replacing air filters. We addressed a weak fan capacitor in the house unit and installed a new thermostat. Additionally, we replaced the defrost control board and the capacitor on the barn’s heat pump, ensuring everything is ready for warm weather.

A thorough inspection of the HVAC system revealed low freon levels. We investigated both units and confirmed no leaks in the upstairs unit. However, a leak was detected in the evaporator coil of the downstairs unit, which will require replacement. We also added 3.5 lbs of R410a to restore proper function.

A detailed residential estimate was conducted in Ringwood to assess HVAC installation needs. We evaluated the property and provided comprehensive estimates tailored to the homeowner's specifications. Our goal was to ensure clarity and transparency regarding potential HVAC solutions. This estimation process informs the customer of recommended options for their upcoming project.

A south AC unit required servicing to improve its cooling efficiency. We checked the air filter, electrical components, and refrigerant levels, adding half a pound of R410a. We also washed the condenser and ran the unit to ensure it operated effectively. The homeowner requested a quote for a new furnace and coil due to the existing mismatched components.

A red flashing light indicated a malfunction in the HVAC system, accompanied by unusual noises from the outdoor unit. We identified a faulty evaporator temperature sensor and control board during our assessment. The next step involves returning with the necessary replacement parts to restore the unit's functionality.

An outdoor unit was humming, but the fan was not turning, indicating a potential issue with the HVAC system. We performed warranty work to diagnose and resolve the problem. Our service restored functionality to the system efficiently. We appreciate the opportunity to assist in Ringwood and ensure the homeowner’s comfort.

After detecting issues with the HVAC system at Ringwood Public School, we responded promptly. We found malfunctioning batteries in the thermostat of the elementary room and hardwired the thermostat, allowing the furnace to operate without issues. Additionally, a bad circuit board was identified in the Brickhouse pack unit. We plan to return with a replacement board to complete the repair.

A thorough inspection of the Goodman HVAC system revealed the need for preventative maintenance. We cleaned the indoor unit, checked electrical components, replaced the filter, and filled the freon. Additionally, we washed both the condenser and evaporator coils. As a result, the system is now running efficiently, achieving a 26-degree temperature difference.

Addressing an unlevel HVAC unit in Ringwood, we leveled and serviced the system effectively. A new 36x36 gray pad was installed to ensure stability. Our skilled technicians, including Joshua Roberts, worked proficiently to complete this job, enhancing the unit's performance and reliability.

A request for an estimate brought us to Ringwood. We assessed the heating and cooling systems and provided detailed recommendations. Our experts, Blazer and Joshua, ensured that all aspects of the installation were covered. This thorough estimation process helps customers make informed decisions about their HVAC needs. We completed the service with all necessary information provided for the client's review.

A heating issue was identified with the north unit not functioning properly. We performed a thorough inspection and completed the necessary repairs to restore heating capabilities. This service ensured that the HVAC system operates efficiently and effectively, enhancing comfort in the home.

A tube heater in the north round top was making noise, prompting us to visit. We identified that the inducer motor assembly needed replacement. After ordering the part, we installed the new inducer motor and tested the heater, ensuring it operated smoothly without any issues. The service was completed effectively in Ringwood.

To ensure optimal comfort, we performed a comprehensive inspection of the HVAC system for a residential homeowner in Ringwood. By evaluating the furnace and heat pump, we identified necessary repairs and solutions. Detailed findings were documented for the homeowner's consideration, providing valuable insights for future service decisions.

During our service call at Ringwood Public School, we inspected and repaired multiple heating systems. The gym's heaters were functioning after replacing the flue pipe and cleaning the spark igniter. We adjusted the thermostat on the south side system, and installed a blower motor relay that restored heat in the main office. A few minor adjustments ensured all systems operated effectively.

After identifying that the blower was making a noise, we promptly addressed the issue. Our inspection revealed the problem, and we worked on diagnosing what might be causing the abnormal sounds. We ensured that all necessary procedures were followed to resolve the situation effectively. The service was completed to meet the customer's needs in Ringwood.

A power surge caused the heating unit to stop functioning. Upon our inspection, we discovered a faulty blower motor and limit switch on the heat strips. We replaced the damaged components with a new motor and limit switch, restoring the system to working condition. The HVAC system is now operating effectively in Ringwood.

A dirty coil prompted us to conduct a service call to enhance the HVAC system's efficiency. We thoroughly cleaned the evaporator coil using two cans of specialized cleaner. The customer expressed interest in a new air handler and coil installation for future improvements. Overall, the job aimed to restore optimal functionality to the system while ensuring customer satisfaction.

A new HVAC system was successfully installed for the customer in Ringwood. We handled the entire installation process, ensuring the system met all necessary specifications. This service enhances energy efficiency and comfort in their commercial space. Our technicians, Jordan and Ray, diligently completed the job to ensure optimal functionality and performance.

A recent residential estimate showcased the need for immediate action. We added 2 lbs of 454b to get the system operational. This ensures the functionality and efficiency of the equipment, providing the homeowner, with a thorough assessment for future considerations. Our work was completed with a satisfactory outcome.

A malfunctioning heating system required our intervention. We installed a new circuit board and replaced the contactor to ensure proper functionality. After testing the unit in heat mode, we confirmed it was operating effectively with no issues at the present time. This work was completed on-site in the customer’s home.

During our inspection of the HVAC system, we discovered the unit was not performing effectively. We cleaned the evaporator coil and added refrigerant to address the low freon level. After making these adjustments, the system achieved a 17-degree temperature difference and started functioning properly.

Preventative maintenance was performed for the HVAC system in Ringwood. We conducted a thorough inspection and servicing to ensure everything is operating efficiently. This proactive approach helps prevent future issues and maintains optimal performance for our customers. Brandon handled the task with expertise, ensuring complete satisfaction with the service provided.

To enhance the HVAC system’s efficiency, we undertook an installation job in Ringwood. This involved running a new lineset and repairing the existing ductwork. Our technicians ensured that all components were properly fitted and optimized for performance, ensuring reliable heating and cooling. This work enables better airflow and overall comfort for the home.

A malfunctioning unit prompted us to perform a service call. We examined the system to identify the issue and checked the charge. After resolving the situation, the unit was fully operational again. Clear and thorough documentation was provided, ensuring the homeowner was informed about the work completed.